NPH-8-007GH Amphenol NovaSensor NPH

Amphenol

$103.00

Description: NPH-8-007GH

← Previous Product Next Product →

Solid state, high reliability
Standard TO-8 package suitable for PC board mount
Low cost, small size
Available in gauge, absolute, and differential pressure versions
Media compatible with non-corrosive gases and dry air
Thermal accuracy FSO 0.5% typical
Overpressure capability to five times maximum rated pressure
Three standard ranges: 0 to 10 inH2O (0 to 25 mbar), 0 to 1 psi (0 to 0.06 bar), and 0 to 5 psi (0 to 0.34 bar)
Nonlinearity 0.05% FSO typical
Standard 3/16 in OD pressure port
Ceramic substrate with temperature compensation resistors

Parameter	Value	Units	Notes
Pressure Range	0 to 10	in H(sub>2_O	(0 to 25 mbar) 0 to 2.5 kPa
	0 to 1	psi	(0 to 7 bar) 0 to 7 kPa
	0 to 5	psi	(0 to 0.34 bar) 0 to 30 kPa
Maximum Pressure	5x		rated pressure ⁽¹⁰⁾
Electrical @ 77°F (25°C) Unless Otherwise Stated
Input Excitation	1.5	mA	2 mA maximum
Insulation Resistance	100	MW	@ 50 VDC
Input Impedance ⁽¹²⁾	3200	W	±25%
Output Impedance	5000	W	±20%
Bridge Impedance	5000	W	±20%
Environmental
Temperature Range
Operating⁽⁹⁾	–40 to 257	°F	(-40°C to 125°C)
Compensated	32 to 158	°F	(0°C to 70°C)
Vibration	10	gRMS	20 to 2000Hz
Shock	100	g	11 milliseconds
Life (Dynamic Pressure Cycle)	1 x 10⁶	cycles
Mechanical ⁽¹⁾
Weight	<0.2	oz	(<5 g)
Media Compatibility	Non-corrosive gases and clean, dry air
Wetted Materials
Top Port	Nickel, gold plated Kovar, silicone gel, gold wire, RTV, silicon and glass.
Bottom Port	Gold plated Kovar, silicon, glass and RTV⁽⁹⁾

Parameter	Min.	Typical 2.5 kPa	Max.	Min.	Typical 7 & 30 kPa	Max.	Units	Notes
Performance Parameters(7), Compensated(1)
Offset	-8	2	8	-4	2	4	mV
Full Scale (FS) Output:
2.5 kPa	25	50	90				mV	2
7 kPa				50	75	150	mV	2
30 kPa				75	100	125	mV	2
Linearity	–1.0	0.1	1.0	–0.25	0.05	0.25	%FSO	3
Hysteresis & Repeatability	-0.2	0.05	0.2	-0.2	0.05	0.2	%FSO
Thermal:
Accuracy of Offset	-3	0.5	3	-2	0.5	2	%FSO	4
Accuracy of FSO	–3	–1	3	-1.5	-0.5	1.5	%FSO	4
Thermal Hysteresis	–0.75	0.5	0.75	–0.5	0.2	0.5	%FSO	5
Short-Term Stability of Offset		5			5		µV/V	6, 11
Short-Term Stability of FSO		5			5		µV/V	6, 11
Notes: Performance with offset, thermal accuracy of offset, and thermal accuracy of FSO compensation resistors. FSO with 1.5mA input excitation. Best fit straight line. 32°F to 158°F (0°C to 70°C) with reference to 77°F (25°C). 32°F to 158°F (0°C to 70°C), by design. Normalized offset/bridge voltage —100 hrs, typical value, not tested in production. All values measured at 77°F (25°C) and at 1.5 mA, unless otherwise noted. Reduced performance outside compensation range. Backside differential tube is nickel or Kovar. Top side pressure. Typical specifications are for reference only; absolute values may vary. For NPH-8, 2.5 kPa gauge (G) and differential (D) sensor, the input impedance is 3400 +/-30%