MPC8360EMDS PowerPC vxworks QNX Development Board

The MPC8360EA processor board can be used as a standalone development board that supports the following features:

• MPC8360EA processor @333 MHz
• MB DDR2 333 MHz (supports optional ECC memory)
• 64-bit PCI Edge connector (3.3 V and 5 V)
• Two RJ-45 G-Ethernet ports
• USB 2.0 high-speed device/host/OTG port
• Dual RS232 ports
• Local bus interface with:
  • 8 MB flash (expandable)
  • Board control and status registers (BCSR) in FBGA
• Riser connectors to Platform I/O board
• JTAG debug port
• I2C port with:
  • 256 KB EEPROM
  • Real-time clock (RTC)
  • SODIMM SPD EEPROM
• PCI add-in standard card form factor (321 x 106 mm) - IEEE 1588

The Platform I/O board is an AdvancedTCA form factor with four PMC slots. The Platform I/O board, along with the expansion modules, provides increased development capabilities. For example:

• PCI Host mode (3.3V 32 and 64-bit bus) with single agent (w/ PCI PMC card and PIB)
• Access to second USB Port (with USB PMC card and PIB)
• Additional USB PHYS (UTMI, ULPI and Serial OTG)
• PCI Host mode (3.3V 32 and 64-bit bus) with multiple agents (w/PCI expansion card and PIB)

Components:

MPC8360EA-MDS-PB - Processor board for the MPC8360EA family

• AC/DC 5V/5A universal power supply kit
• RS232 9-pin standard serial cable
• NXP^® adaptor cable (with RJ45 and RS232 connectors)
• Mini USB adaptor
• USB cable (with standardA and miniB connectors)
• Ethernet cable (RJ45-8 pin connector) (x2)
• Plastic spacer sets (x4)
• SW CodeWarrior^® kit (includes JTAG connectivity unit)
• HW getting started guide
• CD: user information

PQ-MDS-PIB - Platform I/O board for the 83xx family

• AdvancedTCA form factor with four PMC slots
• Allows user to expand the functionality of the MPC8360EA-MDS-PB when used in conjunction with the module cards
• PQ-MDS-PIB board kit
  • Power cable extension with on-off switch
  • 25-pin IEEE 1284 parallel cable
  • Serial cable 10cm D25M to IDC10
  • Parallel cable 10cm D25M to IDC26F
  • RJ45 to IDC8F cable (qty 2)
  • LC loopback 62.5/125Fiber (qty 2)
  • USB cable StndA Plug to MiniB 1Meter
  • USB cable MiniA Plug to StndB 1.5Meter 1
  • PMC board assembly spacers (qty 16)
  • AC/DC power supply 48V/2.7A
  • PQ-MDS-PIB getting started guide
  • PQ-MDS-PIB board Errata
  • PQ-MDS-PIB documentation CD

PQ-MDS-PMCPCI - PMC to PCI module card adaptor for the 83xx family

• Ability to plug in one PCI card
• Supports 3.3V 32 and 64-bit PCI Bus.

PQ-MDS-QOC3 - PowerQUICC^® Quad OC-3 ATM card adaptor for the 83xx family

• Multi-PHY support
  Compatibility with PQ-MDS-PIB

PQ-MDS-T1 - PowerQUICC T1 add-in module for the 83xx family

• PMC mezzanine card form-factor
• Compatibility with PQ-MDS-PIB
• 8 E1/T1 channels
• 2 DS3/T3 channels
• Full board software programmable control