MSBA8100ADS Acceleration Sensor Development Tools ADS FOR MSBA8100

MSBA8100ADS Acceleration Sensor Development Tools ADS FOR MSBA8100
MSBA8100ADS Acceleration Sensor Development Tools ADS FOR MSBA8100 MSBA8100ADS Acceleration Sensor Development Tools ADS FOR MSBA8100

Freescale

$14,451.45 
Availability: 2 Can ship immediately

MSBA8100ADS Acceleration Sensor Development Tools ADS FOR MSBA8100 RoHS : Compliant

Original new and unused with factory package, Stock on hand, ship out immediately

  • Free shipping for order over $300.00
  • Stocking Distributor of Obsolete & Hard to Find IC's/Semi's
  • Warranty: 1 year warranty, 30 days returns policy, 
  • Ship by DHL/UPS/FEDEX/TNT, Samples are available for testing
  • 100% satisfactions， 100% money back, Online Support from 9Am--24Pm
  • Strict security measures keep your info safe

The MSBA8100ADS board supports application development for projects using the MSBA8100 Multi-Standard Baseband Accelerator device. The MSBA8100 device is an accelerator for Turbo and Viterbi decoding and Fast and Discrete Fourier transforms. It is designed to bolster the rapidly changing and expanding wireless markets, such as 3G-LTE, WiMAX and 3GPP-R6. The MSBA8100ADS is used with an integrated development environment (IDE). such as the CodeWarrior®® for StarCore®®-based DSP IDE, a personal computer, and the SmartDSP OS for MSC814x operating system (all provided separately).

  • MSBA8100 accelerator system
    • Programmable system interface with programmable buffer descriptors, two master buses, slave bus to access internal memory and registers, and interrupt or RapidIO doorbell generation.
    • Multi Accelerator Platform Engine for Baseband (MAPLE-B) for Turbo/Veterbi, FFT/iFFT, and DFT/iDFT decoding
    • CLASS non-blocking interconnect fabric to link internal components
    • 512 Kbyte M2 low-latency memory for critical data and temporary data buffering. Accessible from all CLASS masters via four interleaved ports.
    • 512 Mbyte of 32-bit DDR2 memory in a SODIMM200 form factor
    • Two serial RapidIO subsystems each supporting 1x/4x operation up to 3.125 Gbaud, a RapidIO messaging unit, and a RapidIO DMA unit.
    • PCI designed to be compliant with the PCI specification revision 2.2, 33 MHz and 66 MHz. 32-bit PCI interface
    • Three input clocks (global and serial RapidIO PLL) and four PLLs with clock ratios selected during reset via reset configuration pins.
  • MSC8144 DSP processor system
    • Four SC3400 cores running at up to 1 GHz core frequency at 1.0 V core voltage
    • 512 Mbyte of 32-bit DDR2 memory in a SODIMM200 form factor
    • 64 Kbyte serial EEPROM for boot code
    • 8 Mbyte Flash memory for program code
    • PCI version 2.2 bus, 33/66 MHz, 3.3 V, in agent mode only
    • UTOPIA level II interface, 8/16 bits up to 50 MHz
    • Two Gigabit Ethernet interfaces supporting MII, RMII, SMII, RGMII, and SGMII (over SerDes). RMII and SMII supported via expansion card
    • Eight TDM ports
    • UART supports 6.25 Mbps RS-232 with data exchange rate at 115 Kbps
    • I2C interface
    • 1x/4x serial RapidIO endpoint
  • MPC8560 host processor system
    • 256 Mbyte 64-bit wide DDR memory in SODIMM200 form factor
    • 16 Mbyte Flash memory, upgradeable to 32 Mbyte
    • PCI version 2.2 bus, 33/66 MHz, 3.3 V, as PCI host
    • 32-bit local bus up to 166 MHz
    • 256 Kbit serial EEPROM for boot code
    • Two TSEC Ethernet controllers with GMII, TBI, RGMII, RTBI configured as RGMII on the ADS board
    • Eight TDM ports
    • UART supports data exchange rate of 115 Kbps
    • I2C interface
    • UTOPIA2 supports 16-bit UTOPIA level II running at up to 50 MHz acting as the master device
  • Ethernet Quad-PHY supporting connection between the MPC8560 and the MSC8144 and two external RJ45 connectors.
  • TSi578A serial RapidIO switch and EEPROM to connect the MSBA8100, the MSC8144, and two AMC connectors
  • Printed circuit board with clock, power, control, and interconnection circuits
  • Plastic spacers and mounting screws
  • CodeWarrior® USB TAP connector
  • AC/DC 12 V/5.5A universal power supply kit
  • RS-232 standard serial cable with two 9-pin connectors
  • NXP® adapter cable (joined) with one 10-pin and two RS-232 connectors
  • Two Ethernet cables with RJ45 connectors
  • Allen key for assembly.

    Other customers purchased